burkertS030系列流量底座00423984 現貨寶德

burkertS030系列流量底座00423984 現貨寶德

S030 www.burkert–usa.com p. /10 INLINE fitting with paddle-wheel for flow measurement The fitting S030 has a built-in paddle-wheel to measure the flowrate. When liquid flows through the pipe, the paddle-wheel is set in rotation producing pulses which frequency is proportional to the flowrate. This leads to a very leak-proof construction, called the “INLINE Quarter-turn” technology. The paddle-wheel rotation is detected contactless through the fitting wall. The sensor unit can be snapped-on or removed without opening the pipe or interrupting the process. General data Pipe diameter 1/4" up to 2 1/2" (DN 06 up to DN 65) Measurement range from 0.13 up to 317 gpm Flow velocity 1.0 up to 32.8 ft/s (0.3 up to 10 m/s) (see flow diagram) Accuracy1) Individual works calibration (Teach-In, via a remote transmitter) Standard mean K-factor ≤ ±0.5% of F.S.* (on request) ≤ ±(0.5% of F.S.* + 2.5% of Reading) Linearity1) ≤ ±0.5% of F.S.* (at 10 m/s) Repeatability ≤ 0.4% of Reading* Fitting port connection Metal Plastic Internal or external thread, weld ends, Tri-Clamp® or flange True union, spigot or external thread Materials Seal Body Screws Paddle-wheel Shaft and bearing FKM or EPDM (depending on version, see ordering chart) Stainless steel (316L -1.4404), brass (CuZn39Pb2), PVC, PP, PVDF Stainless steel (316L -1.4404) PVDF (PP on request or stainless steel, see datasheet 8030HT) Ceramics (Al2O3) Type 8030 Flow sensor Type 8032 On/Off flow sensor/switch Type SE30 Ex Flow sensor ATEX version Type S030 can be combined with... Type 8035 Flow transmitter • Pipe diameters 1/4" (DN 6) to 2 1/2" (DN 65) • Closed pipe system, i.e. sensor inside fitting • Quarter-turn technology • Electronics available for - Indication, Monitoring, Transmitting - On/Off control, Batch control Medium data Fluid temperature 32°F up to 122°F (0°C up to 50°C) for fitting in PVC 32°F up to 176°F (0°C up to 80°C) for fitting in PP 5°F up to 212°F (-15°C up to 100°C) for fitting in stainless steel, brass or PVDF Fluid pressure (max.) Metal Plastic see pressure / temperature chart PN 16 (PN40 on request) PN 10 Fluid Solid particles rate Viscosity clean, neutral or slightly aggressive, solid-free liquids max. 1%, size of particles 0.5 mm max. 300 cSt. max. * F.S. = Full scale (10 m/s) 1) Under reference conditions i.e. measuring fluid = water, ambient and water temperature = 68°F, applying the minimum inlet and outlet pipe straights, matched inside pipe dimensions.

burkertS030系列流量底座00423984 現貨寶德