burkert 寶德00423985 m5 W45W5

S030 www.burkert–usa.com p. /10 INLINE fitting with paddle-wheel for flow measurement The fitting S030 has a built-in paddle-wheel to measure the flowrate. When liquid flows through the pipe, the paddle-wheel is set in rotation producing pulses which frequency is proportional to the flowrate. This leads to a very leak-proof construction, called the “INLINE Quarter-turn” technology. The paddle-wheel rotation is detected contactless through the fitting wall. The sensor unit can be snapped-on or removed without opening the pipe or interrupting the process. General data Pipe diameter 1/4" up to 2 1/2" (DN 06 up to DN 65) Measurement range from 0.13 up to 317 gpm Flow velocity 1.0 up to 32.8 ft/s (0.3 up to 10 m/s) (see flow diagram) Accuracy1) Individual works calibration (Teach-In, via a remote transmitter) 

• 流量計類型: 渦輪流量計

板材

 表殼，蓋，一定相聯接器：PC

  電纜電線充電插頭/封密/螺栓：PA / NBR /裝飾管

  接液結構件的材料陪件，智能變送器：紫銅/304不銹鋼，PVC, PP, PVDF

  槳輪：PVDF

  軸，聯軸器/密封蓋：陶瓷廠家/ FKM或EPDM（在于于感測器器，選擇適合的舊版）

組合件連結：電攬插孔，EN 175301-803（2508型）

接高壓電纜：max. 1.5 mm2 cross section; max. 50 m length, shielded

詳盡的產品數劇（曲線擬合+網絡控制模塊）

水管公稱直徑：DN06 DN65到

估測范圍之內：0.3至10米/秒