burkert0263電磁閥 *德國 寶德burkert 00026207電磁閥正常關閉或打開 閥體材質:黃銅、不銹鋼 與外界隔絕的液體從操作機制,通過隔膜的分離 緊湊的設計
2/2-way valve with isolating diaphragm for medium up to +100ºC
Type 0263 can be combined with...
Type 6012/6014P Type 8640/8644
Pilot valve Valve Block
The externally controlled valve is pneumatically operated. It consists of a diaphragm actuator and a 2-way valve body. Between the valve housing and the drive, there is a hermetically sealed membrane.
The diaphragm actuator moves a spindle with valve disc against a spring and switches the valve. The spindle is designed glandless with double seal. The actuator body is made out of epoxy resin.
Circuit function A
2/2-way valve, externally controlled, normally closed by spring operation with pilot valve
Circuit Function B
2/2-way valve, externally controlled, normally opened by spring, operation with pilot valve
Type 8645 | Type 8311 | |
Valve Block | Pressure Sensor/Switch | |
Technical data | ||
Body material | Brass, stainless steel | |
Inner part valve | Stainless steel | |
Actuator | Epoxy resin | |
Seal material | NBR, FKM, EPDM, | |
Medium | ||
NBR | neutral medium | |
(e.g. compressed air, town gas, water, hydraulic oil) | ||
FKM | per-solution, oxygen, hot air | |
EPDM | oil and fat-free medium | |
e.g. hot water, alkaline washing and bleaching lyes | ||
Viscosity | max. 100 mm2/s | |
Medium temperature | ||
NBR | -10 up to +90 ºC | |
FKM | -10 up to +100 ºC | |
EPDM | -10 up to +100 ºC | |
Control medium | neutral gases and liquids, in particular air, | |
water, hydraulic liquids up to max. +90 ºC | ||
Pilot pressure | see diagram | |
Ambient temperature | -10 up to +90 ºC | |
Installation | As required, preferably with actuator upright | |
Flow rate | measured at +20°C, 1 bar pressure at valve inlet | |
Kv value water [m3/h]: | and free outlet | |
Pressure values [bar] | Measured as overpressure to the atmospheric pressure |