?Seat valve, direct-acting?Pressure range up to 100 bar?Media temperature up to 250 °CBurkert 00061010寶德0255?Push-over solenoid system?For gases and fluids
2/2-way Solenoid Valve
for high pressures and temperatures
Burkert 00061010寶德0255
Burkert 00061010寶德0255
Type 0255 can be combined with...
Type 2508 Type 1078
Cable plug Timer unit
The direct-acting plunger solenoid valve Type 0255 is also suitable for high pressures and high temperatures.
Circuit function A
2/2-way valve, normally closed by spring force
Type 2511
ASI cable plug
Technical data
Orifice | DN 1.0 - 6.0 mm | |||||||||
Body material | Brass with stainless steel seat 1.4305 | |||||||||
or stainless steel body 1.4581 | ||||||||||
Coil material | Epoxy | |||||||||
Coil insulation class | H | |||||||||
Seal material | FKM, PTFE | |||||||||
(others on request) | ||||||||||
Media | ||||||||||
FKM | Hot air, hot oils, oils with additives, | |||||||||
per-solutions | ||||||||||
PTFE | Water, steam, fuels, hydraulic materials, alcohol, | |||||||||
organic solvents, waste gas | ||||||||||
Media temperature | ||||||||||
FKM | -10 to +130 °C | |||||||||
PTFE | -40 to +180 °C | |||||||||
Steel | Up to + 250 °C (on request) | |||||||||
Viscosity | Max. 21 mm2/s | |||||||||
Ambient temperature | Max. + 55°C (250 °C on request), | |||||||||
please see ordering chart | ||||||||||
Voltage tolerance | ± 10% | |||||||||
Duty cycle | * continuous rating | |||||||||
Electrical connection | Cable plug for Ø 7 mm cable, acc. to DIN EN | |||||||||
175301-803 Form A (supplied as standard) | ||||||||||
Protection class | IP 65 with cable plug | |||||||||
Weight [kg] | 0.6 (brass version) | |||||||||
Installation | As required, preferably with actuator upright | |||||||||
Power consumption | Response times | |||||||||
Inrush | Hold (hot coil) 1) | Orifice [mm] | Opening [ms] | Closing [ms] | ||||||
AC [VA] | AC [VA/W] | DC [W] | AC | DC | AC | DC | ||||
35-40 | 16/10 | approx.12 (13) | ||||||||
1.0-6.0 | 10-20 | 20-80 | 20-30 | 20-30 |