burkert流量計底座/00424006

burkert流量計底座/00424006

從峰實業科技單位（天津）有局限單位 專做進囗的量的實業企業產品設備單位， 一般銷售進囗的量 電磁感應閥 熱度計 pu氣管閥 比例怎么算閥 上下調整閥 調節器 調節器器 純水電導率 等方面很多企業產品設備， 還要德舊新求美者客服熱線。

General data
Pipe diameter DN06 to DN65
Measurement range from 0.5 to 1200 l/min
Flow velocity 0.3 to 10 m/s  (see flow diagram)
Measurement error
Teach-In  (via a remote transmitter)
Standard K-factor
±01% of Reading 1)  (at the teach flow rate value)
±2.5% of Reading 1)
Linearity 1) ±0.5% of F.S.*
Repeatability 1) ±0.4% of Reading
Process connections

burkert流量計底座/00424006
Metal
Plastic
Internal or external thread, weld ends, Clamp or flange
True union, spigot or external thread
Materials
Seal
Body
Screws
Paddle wheel
Shaft and bearings
FKM or EPDM  (depending on version, see ordering chart)
Stainless steel  (316L -1.4404) , brass  (CuZn 39 Pb 2 ) ,
PVC, PP, PVDF
Stainless steel  (316L -1.4404)
PVDF  (PP on request or stainless steel, see data sheet 8030HT)
Ceramics  (Al 2 O 3 )
Medium data
Medium temperature 0 to 50°C  (32 to 122°F) for sensor-fitting in PVC
0 to 80°C  (32 to 176°F)  for sensor-fitting in PP
-15 to 100°C  (5 to 212°F)  for sensor-fitting in stainless steel,
brass or PVDF
Medium pressure  (max.)
Metal
Plastic
see pressure/temperature chart
PN16  (232.16 PSI) (PN40 (580.4 PSI) on request)
PN10  (145.1 PSI)
Fluid properties
Pollution
Viscosity
clean, neutral or slightly aggressive, solid-free liquids
max. 1%, size of particles 0.5 mm max.
300 cSt. max.